SHIELD01 H-Bridge Arduino Shield
NVE Corporation's 40 V/50 A Arduino shield is ideal for motor speed and direction controls, DC-to-AC inverters, and robotics
NVE Corporation's SHIELD01 H-bridge Arduino shield features four power MOSFETs, four ultrahigh CMTI isolated MOSFET drivers, and two ultraminiature isolated DC-to-DC converters.
The two low-side IL610CMTI-1E isolators level-shift the Arduino outputs to six volts to drive the low-side MOSFETs. The high-side isolators drive the high-side MOSFETs, as the MOSFET source voltages float with the load. The two ILDC13-15E DC-to-DC converters generate floating 6 volt supplies referenced to the MOSFET source pins to power the high-side isolator/gate drivers.
The isolators have extremely high common-mode transient immunity (CMTI), so they do not glitch even when MOSFET source-pin voltages change rapidly as the MOSFETs switch. The resistors in series with the isolator input coils set the input current to approximately 12 mA. The resistor values maximize CMTI.
- Fully Arduino compatible
- Motor control up to 2 kW (2.5 hp)
- Thermal vias and heat-sinking
- Standard Arduino shield form factor
- Simple three-wire Arduino interface (PWM, dir, and enable)
- Easy connections with large screw terminals
- Arduino example programs available for download
- Max. load: 2 kW (40 V/50 A)
- Load supply line: 8 V to 40 V
- Operating temperature range: -40°C to +85°C
- Logic-to-load isolation: 2.5 kVRMS per UL 1577
- Arduino supply: 7 V to 20 V via power connector or 5 V via USB; 500 mA
- Dimensions: 2.1" x 2.7" (53.4 mm x 68.6 mm)
- RDS(on): 1.2 mΩ typ. each MOSFET
SHIELD01 H-Bridge Arduino Shield
| Image | Manufacturer Part Number | Description | Available Quantity | Price | View Details | |
|---|---|---|---|---|---|---|
![]() | ![]() | SHIELD01 | 40V/50A H-BRIDGE ARDUINO SHIELD | 4 - Immediate | $160.33 | View Details |




